Différences

Cette page vous donne les différences entre la révision choisie et la version actuelle de la page.

--- projets:terrarium_project_english_version [2019/03/20 17:12]
isa
+++ projets:terrarium_project_english_version [2019/05/22 09:51] (Version actuelle)
thierry_dasse
@@ Ligne 14: / Ligne 14: @@
 }}}
-<!-- Indiquez ici une petite introduction au projet, qui apparaîtra dans la liste des projets. -->
 An exchange project has been set up between Universcience and the Cluj Cultural Center in Romania, as part of the France-Romania season. The first part of this exchange consists of a FabLab residence of two Romanian Biologists from the University of Agricultural Sciences and Veterinary Medicine Cluj-Napoca, who, together with the Carrefour de Numerique team, will work on building up a fully automated terrarium.  The residence runs from March 19th to 23rd.
-Once the Terrarium is in place, the objective of the residence is to be able to check & register  the parameters of soil & air humidity, air temperature & ventilation as well as light intake of the terrarium and to build up an automatized system for watering, heating/cooling, lighting and air flow in the terrarium.
+Once the Terrarium is in place, the objective of the residence is to be able to check & register  the parameters of soil & air humidity, air temperature & ventilation as well as the light-intake of the terrarium and to build up an automatized system for watering, heating/cooling, lighting and air flow in the terrarium.
 The system will also be used to study different aspects of the Terrarium Eco-System. How do plants affect each other, what is the correlation between humidity, temperature and light intake, what are the optimal humidity, temperature and light values for a favorable plant growth?
@@ Ligne 27: / Ligne 25: @@
 ===== Conception =====
-<!-- Présentez ici la phase de réflexion et de conception de votre projet, vos choix, etc. ... -->
 **Terrarium**
 **To set up the terrarium technically, you will need :**
-  * **A terrarium** > can be found in any petshop or you can recycle an old aquarium by adding a piece of glass on the top.
+  * **A terrarium** > the box: can be found in any petshop or you can recycle an old aquarium, ours is a 40x25x25 cm (LxWxh) glass aquarium
-  * **Clay balls** > to cover the terrarium floor (1st layer).
+  * **A vertical plant wall** > we used a polystyrene board with glued hydroponic planting mesh pots.{{ :projets:terrarium:pot-ajoure-pour-hydroponie-ghe.jpg?100|}} you can design your own as long as you keep in mind that the plant pots need to enable roots and soil to reach the filter tissue
-  * **A piece of polystyren** > glue the openwork plants' pots on it. We used a glue gun to do so.
+  * **Clay balls** > 1st layer: to cover the terrarium floor - used for draining the excess water from the soil - you can find them in bigger garden shops
-  * **Plants** > Choose dwarf plants, they won't grow too much (ask when you buy it). Examples : //Fittonia// sp, //Syngonium// sp, //Pilea cadierei// Sil, //Nephrolepsis// sp, //Ficus pumila// sp.
+  * **A piece of geotextile** > 2nd layer: a felt-like non-woven textile to cover the clay balls and the vertical wall. - this tissue will keep the soil from mixing with the clay balls, depending on the texture the textile will absorbe the water and keep the soil wet for a longer time, you can alternatively use a mosquito net. > https://study.com/academy/lesson/what-is-geotextile-fabric-definition-types.html
-  * **A piece of filter tissue** > to cover clay balls and a part of the polystyren and pots (2nd layer).
+  * **Soil** > 3rd layer: Find a a kind of soil made from sphagnum moss. A soil with a little bit acidity (here PH 4.8) which encourages plants growth.
-  * **Soil** > This is the 3rd layer. Find a a kind of soil made from sphagnum moss. A soil with a little bit acidity (here PH 4.8) encourages plants growth.
+  * **Moss** > 4th layer: to cover everything, used for aesthetics, you can also use dry leafs
-  * **Moss** to clover everything (4th layer).
+  * **Plants** > Choose dwarf plants, they won't grow too much (ask when you buy it). Examples : //Fittonia// sp, //Syngonium// sp, //Pilea cadierei// Sil, //Nephrolepsis// sp, //Ficus pumila// sp. Make sure to use humidity loving plants from the same biotope.
 **Electronic part**
-We choose to use arduino to control
+We chose to use an arduino uno to control:
-  * the light
+  * RGB lights: Red & Blue lights are helping plant growth, while the green light mimics the sun-light and makes the terrarium look pretty :)
-  * a computer fan
+  * a computer fan: to enable air-flow and to balance the internal air-humidity
-  * an air humidity and temperature sensor > DHT 22
+  * an air humidity and temperature sensor > we used DHT 22
-  * a soil humidity sensor
+  * a soil humidity sensor >
+  * a water pump > we used VMA421
-**1/ Light**
-We use RGB LEDs that have one commun cathode.
+Because there is a lot of files on this project, we continue the documentation and deposit on a framagit :
-Arduino program : {{:projets:terrarium:rgbled.zip|}}
+Deposit can be found here : https://framagit.org/makeforartandscience/terrarium
+Wiki documentation is here : https://framagit.org/makeforartandscience/terrarium/wikis/home
-===== Difficultés rencontrées =====
-<!-- Présentez ici les problèmes et difficultés rencontré durant votre réalisation, et comment vous avez pu y remédier. -->
+===== Photos =====
+Photos by Miruna Batin.
-===== Suites du projet =====
-<!-- Présenter ici les évolutions possibles du projet, les améliorations que vous aimeriez y apporter, etc. ... -->
-===== Photos =====
 <!-- Quelques photos du rendu final du projet, mais aussi si c'est possible des differentes etapes si elle n'ont pas déja été documentées visuellement -->
+{{:projets:terrarium_project_english_version:image001.jpg?400|}}  {{:projets:terrarium_project_english_version:image002.jpg?400|}}  {{:projets:terrarium_project_english_version:image004.jpg?400|}}  {{:projets:terrarium_project_english_version:image005.jpg?400|}}  {{:projets:terrarium_project_english_version:terrarium_1_.jpg?400|}}
 <!-- La Structure "Conception / Réalisation / Difficultés rencontrés / Suite du projet " est bien sur indicative, vous pouvez l'adapter à votre guise. N'hesitez pas a vous inspirer des documentations deja existance pour realiser la votre. -->

Carrefour numérique² - fablab

Outils d'utilisateurs

Outils du Site

Différences

Outils de la Page